Wedding Favors & Gifts by Dennis Hardy - HTML preview
PLEASE NOTE: This is an HTML preview only and some elements such as links or page numbers may be incorrect.
Download the book in PDF, ePub, Kindle for a complete version.
Download the book in PDF, ePub, Kindle for a complete version.
Document Outline
- Wonderful Wedding Favors And Wedding Gifts
- Jewelry Set
-
-
-
- Materials: Clark's ONT or J & P Coats Mercerized Crochet 2 balls, White, size 70. Steel crochet hook No. 10.LEFT HAND: Beginning at wrist, ch 162, and sl st in 1st ch to form ring.
- 1st rnd: * Ch 5, skip 5 ch, 1 s c in next ch, and repeat from * around.
- 2nd rnd: * Ch 5, 1 s c in next loop, and repeat from * around.
- 3rd rnd: Same as 2nd rnd but making ch-4 loops.
- 4th to 8th rnds incl: Same as 2nd rnd making ch-3 loops.
- 9th and 10th rnds: Make ch-4 loops.
- 11th to 17th rnds incl: Make ch-5 loops.
- 18th rnd: Ch 5, 1 s c in same loop as last s c. * Ch 5, 1 s c in next loop, and repeat from * 14 more times. ** Ch 3, 1 s c in saem loop as last s c, ch 3, 1 s c in next loop, ** and repeat from ** to ** twice more. Then ch 3, 1 s c in next loop and repe
- 19th rnd: Work 16 ch-5 loops, then ch 4, 1 s c in. 1st ch-3 loop, * ch 3, 1 s c in same loop, ch 5, skip 3 ch-3 loops of previous rnd, 1 s c in next loop, and repeat from * twice more. Ch 3, 1 s c in same loop as last s c, ch 4, 1 s c in next loop and wo
- 20th rnd: Make an extra loop (an increase) in the 2nd loop of previous row to form a dart on the inside of the thumb begun in the 18th rnd. Repeat this extra loop every other rnd, making it 1 loop to the left of the last increase, until 7 extra loops
- 21st to 37th rnds: Repeat the design on the back of hand as in the 19th and 20th rnds alternately, 8 more times (19 rnds of design in all). Make the thumb opening on the 33rd rnd.
- 33rd rnd: Work to the extra loop in the last row, ch 30 (for thumb opening) skip 11 loops, then work on around as before.
- 34th rnd: Work to the last loop just before ch-30, ch 5, 1 s c in 3rd ch, * ch 5, skip ch-5, 1 s c in next ch and repeat from * for length of the extra ch.
- 38th to 46th rnd incl: Continue on around in ch-5 loops.FINGERS. Put glove on so that the design will come in center of back of band and thumb opening in right position, and mark fingers by putting a safety pin on palm and back of hand between each fin
- CUFF. 1st and 2nd rnds: Attach thread at wrist and work ch-6 loops for 2 rnds.
- 3rd rnd: Ch 3, 1 d c in same loop, ch 3, * 1 d c in next loop, ch 5, 1 d c in same loop, ch 3, and repeat from * around, ending with s c in ch-3 first made.
- 4th rnd: Ch 4, * skip ch-2, 3 d c over ch-5, ch 3, 6 d c in same loop, ch 3, and 3 more d c in same loop (12 d c in all), ch 2, 1 s c in next ch-5 loop, ch 3, 1 s c in same loop, ch 2, and repeat from * around, ending with 1 s c in ch-4 first made.
- 5th rnd: Ch 9, * 1 s c between 6th and 7th d c of 12-d c group, ch 3, 1 s c in same place, ch 7, 1 s c in ch-3 loop (between 2 s c), ch 7, and repeat from * around, ending rnd with s c in s c just before ch-9.
- 6th rnd: Ch 5, d c in ch-9 loop, ch 5, d c in same loop, ch 1, * a ch-5 p, ch 1, 1 d c in next ch-7 loop, ch 5, 1 d c in same loop, ch 1, and repeat from * around, ending with 1 s c in ch-5 loop first made.
- 7th rnd: Ch 3, 1 s c under ch-5, * ch 3, 1 s c in same loop, ch 6, 1 s c under next ch-5, and repeat from * around, ending with d c in ch-3 first made.
- 8th rnd: Ch 4, a ch-5 p, * 3 d c with ch-1 between d c's in next ch-6 loop, ch 1, 1 p, ch 1, and repeat from * around, ending with s c in ch-4 first made.
- 9th rnd: Ch 8, * 1 d c over next ch-1 (between 1st and 2nd d c,), ch 5, d c over next ch-1 (between 2nd and 3rd d c's of same group), ch 3, and repeat from * around, ending with s c in ch-8 first made.
- 10th to 14th rnds incl: Repeat from 4th to 8th rnds incl.
- 15th rnd: Same as 4th rnd. Break off.
- Make other glove to correspond reversing position of thumb. Starch cuffs stiffly.
- Materials: Clark's O.N.T. (5 balls) or J. & P. Coats (3 balls) Mercerized Crochet, size 50, color 9 Yellow. Milward's steel crochet hook No. 8 or 9.
- Left Hand. Beginning at wrist, ch 82 to measure 6 inches, turn.
- 1st row: D c in 7th ch from hook, ch 3, skip 2 ch, d c in next, ch 3, skip 2 ch, 5 d c in next, * ch 3, skip 2 ch, s c in next, ch 5, skip 2 ch, s c in next, ch 3, skip 2 ch, 5 d c in next, repeat from * until 8 groups of 5 d c are made. Ch 3, skip 2 ch,
- 2nd row: Tr in next d c, ch 3, * tr in each of next 5 d c with ch-1 between trs, ch 4, s c under ch-5 loop, ch 4, repeat from * across. After the last group of 5-tr, ch 3, skip next d c, tr in next sp, ch 2, tr in last sp, ch 6, turn.
- 3rd row: Tr in tr, ch 2, * tr in each of next 5 tr with ch-2 between trs. Repeat from * across omitting ch-2 between groups of tr thus having the last tr of one group and the first tr of next group come together. After last group of 5-tr, ch 2, tr in nex
- 4th row: D c in next tr, ch 2, d c in next tr, ch 3, * skip next tr, 5 d c in next tr (this is the center tr of 5-tr group), ch 3, skip next tr, s c in next sp, ch 6, skip 2 tr (which come together), s c in next sp, ch 3, repeat from * across ending
- 5th to 9th rows incl: Repeat 2nd, 3rd and 4th rows. Then repeat again 2nd and 3rd rows. At end of last row, join with sl st to beginning of row (thus closing up opening), hereafter work in rnds.
- 10th rnd: Sl st to 1st tr, ch 5, skip next sp, d c in next sp, ch 3, skip next tr, 5 d c in next tr, ch 3, skip next tr, s c in next sp, and work across as in 4th row until the last group of 5-d c is made, then ch 3, skip next tr, s c in next sp, ch 5, s
- 11th rnd: Ch 4, and work in pattern as before to 18th rnd incl. End and begin each rnd in such manner that shell patterns come directly over shell patterns as previously done.
- Shaping for Thumb: Try on glove with opening at center of palm of hand. Place a safety pin on palm and back of hand separating thumb from hand (thumb to be worked on later).
- 19th and subsequent rnds: Attach thread in sp at pin on palm side, ch 10, s c in sp at pin at back of hand, and work in pattern around. Starting 2 5-d c shells over ch-10 (8 groups of shells in all). Work in pattern around and around the hand part of g
- Fingers. Put glove on and mark fingers by putting a safety pin on palm and back of hand between each finger.
- Forefinger: Attach thread to sp at pin on palm side between forefinger and middle finger. Work in pattern across to same pin on back of hand, ch 3, cross over to palm side, s c in sp at pin, and continue pattern in spiral until length desired. It is bett
- Ring and Little Fingers: Same as forefinger and middle finger.
- Thumb: Attach thread to sp at palm side of hand and work as for forefinger.
- Gauntlet. 1st rnd: Attach thread at opening point on foundation ch at wrist. Ch 3, skip 1 sp and d c, * 5 d c in next ch st, ch 3, skip next 5-d c shell, s c in next loop. Ch 5, skip s c, s c in next loop. Ch 3, skip next s c, repeat from * spacing work
- 2nd rnd: Ch 5, * tr in each of next 5-d c with ch-1 between each tr, ch 4, s c in ch-5 loop, ch 4, repeat from * around. After the last tr, ch 4, s c under ch-5 loop.
- 3rd rnd: Ch 5, * tr in each of next 5-tr with ch-2 between trs, repeat from * around omitting ch-2 between group, of trs (thus having the last tr of one group and first tr of next group come together). After last tr, ch 2, skip next loop, d c in next l
- 4th rnd: Ch 5, s c in next sp, ch 4, skip next tr, 5 d c in next tr, * ch 4, s c in next tr, ch 5, s c in next tr (hereafter the 2 trs coming together are counted as 1 tr). Ch 4, 3 d c in next tr, repeat from * around ending with s c under ch-5 loop, c
- 5th to 17th rnds incl: Repeat 2nd, 3rd and 4th rnds. Finish opening with 1 row of s c with 2 ch-loops on one side of opening for buttons. Sew buttons on opposite side to correspond.
- Right Hand. Make the same as for left hand, only being careful that the fingers are made to correspond with the right hand.
- Materials: Clark's O.N.T. (5 balls) or J. & P. Coats (3 balls) Mercerized Crochet, size 30, color 9 Yellow. Milward's steel crochet hook No. 7. 2 yds. millinery wire and 2 yds. of ribbon.
- Crown. Beginning at tip, ch 10, join with sl st to form ring.
- 1st rnd: * Ch 10, s c in ring, repeat from * until 24 loops are made, then ch 6.
- 2nd rnd: S c in 1st loop, * ch 5, s c in next loop, repeat from * around, ending, with s c under ch-6 of previous rnd.
- 3rd rnd: Ch 5, s c in each loop with ch-5 between s cs.
- 4th rnd: * Ch 3, 5 d c under next loop, ch 3, s c in next loop, ch 4, s c in same loop, repeat frorn * until 12 5-d c groups are made, then ch 3, s c in next loop, ch 5, s c in next loop, ch 2, s c in first d c of 5-d c group.
- 5th rnd: Ch 5 (to count as tr and ch-1), tr in each of next 4 d c with ch-1 between each tr, * ch 4, s c in next ch-4 loop, ch 4, tr in each d c of group with ch-1 between each tr, repeat froal around. After last group of trs is made, ch 4, s c in next
- 6th rnd: Ch 6 (to count as tr and ch-2), tr in each tr with ch-2 between trs, but omitting ch-2 between groups (that is between last tr of one group and 1st tr of next group). After last tr, join with sl st in 4th ch of ch-6 first made and sl st to 1
- 7th rnd: * Ch 5, s c under next ch-2 sp, repeat from * around (do not make s cs between 2 trs that come together without ch-2 between), ending with ch 5, s c in 1st loop.
- 8th rnd: * Ch 3, 5 d c under next loop, ch 3, s c in next loop, ch 5, s c in next loop, repeat from * ending with last s c in ch-3 first made.
- 9th rnd: * Ch 4, tr in each of next 5 d c with ch I between trs, ch 4, s c in ch-5 loop, repeat from * ending with sl st in 4th st of ch-4 first made.
- 10th rnd: Same as 6th rnd, ending with sl st in 4th st of ch-6 first made.
- 11th rnd: Same as 7th rnd, ending with ch 5, sl st in 1st loop.
- 12th rnd: Same as 8th rnd.
- 13th rnd: Same as 9th rnd. After last group of trs is made, ch 4, sl st in 4th st of ch-4 first made.
- 14th rnd: Same as 6th rnd.
- 15th rnd: Ch 5, s c under next ch-2 sp, ch 5, skip next 2 tr, s c under next ch-2 sp, ch 5, s c under next ch-2 sp, * ch 5, skip next 2-tr (that are together), s c under next ch-2 sp, ch 5, skip next 2 tr, s c under next ch-2 sp, ch 5, s c under next c
- 16th rnd: Ch 5, s c under next ch-5 loop, then repeat from * of 8th rnd. After last group of d cs are made, ch 3, s c under next ch-5 loop, ch 6, skip next loop, s c under next loop.
- 17th rnd: Same as 9th rnd. After last group of trs is made, ch 4, s c under cb-6 loop.
- 18th rnd: Ch 4, tr in each tr with ch-2 between trs, but omitting ch-2 between groups (as in 6th rnd). After last tr, join with sl st in 4th st of ch-4 first made.
- 19th rnd: Same as 15th rnd, ending with ch-5, s c under 1st ch-5 loop.
- 20th rnd: Same as 8th rnd. After last group of d c is made, ch 3, s c under next loop, ch 5, s c under next loop.
- 21st rnd: Ch 4, tr in each of next 5 d c with ch-1 between trs, then repeat from * of 5th rnd. After last group of tr is made, ch 4, s c under next loop.
- 22nd rnd: Same as 6th rnd, but end with s c in 6th st of ch-6.
- 23rd rnd: Ch 4, and make 2 tr under each ch-2 sp and 1 tr in each tr. Join with sl st. Do not break off.
- Brim. 1st rnd: * Ch 6, skip 2 tr, s c in next tr, repeat frorn * around.
- 2nd rnd: Ch 5, s c under next loop, then repeat from * of 8th rnd of crown, around.
- 3rd rnd: Same as 9th rnd of crown.
- 4th rnd: Same as 6th rnd of crown. After last tr, join with sl st in 6th st of ch-6 first made.
- 5th rnd: Same as 7th rnd of crown.
- 6th to 12th rnds incl: Repeat from 8th to 14th rnds of crown incl.
- 13th rnd: S c in each tr and 2 s c (and sometimes 3 s c to keep work flat) in each sp.
- 14th and 15th rnds: S c in each s c. With thread double work a rnd of s c holding along wire and working over it so that it is completely covered. Fasten wire neatly. Break off. Sew ribbon band inside of crown adjusting headsize. Starch hat or use white
-
-
-




