Orgone devices
Orgone devices are any mechanism built solely to work with orgone. Some popular orgone device presets are: Tower Busters, Holy hand grenades and cloud-busters. Orgone devices are also called "Orgonite". I prefer not to use this name for all devices as it was intended to be used for a compound (matrix) not the entire device. "Orgonite" comes from Karl Hans Welz orgone purifying devices. I will use the word orgonite to refer to the purifying devices only. Karl has articulated many brilliant devices using applied science. He (and many others) have claimed to make an "Orgone Generator". I am a bit sceptic about this as orgone is primordial and readily abundant from the get go. If we can create it, we can destroy it as well. In my opinion orgone is not for us mere humans to destroy or create. Don Croft was able to refine the orgonite devices with the aid of some energy sensitive beings. Below is an example of various orgone devices:
The shown HHG, TB, and pendant were made at http://harrisorgone.com/
How do purifiers work? - Purifiers first gather and concentrate orgone using an detailed synthetic matrix. The matrix is a mix of organic and inorganic material. Typically the organic material is epoxy or fibreglass resin and the inorganic material is metal shavings or powder. Resin allows the maker to shape the device into an form using a mold. There typically is one crystal in the middle of the device that has the ability to convert DOR to POR. The POR tends to flow out the tips of the crystal. In simple terms, the tips are where there is the least orgone entering the crystal (resulting in little outgoing resistance). Its best to have the tips close to or outside the matrix bounds. This ensures the POR can exit the device quickly, ultimately allowing the device to process DOR faster. Some believe DOR enters the bottom of the device and POR comes out the top. This is incorrect. Orgone in our atmosphere tends to move west to east. So, a side of the device will absorb more orgone than usual. DOR tends to head towards the center of the earth (more on this later) so if anything, DOR will be absorbed through the top of the device. However, the device is designed to pull in orgone from all sides, so input/output directionality is hard to analyze. If the crystal is placed vertically it will cause POR to follow faster vertically and will flow energy out of the top and bottom of the device. The below crystal shows more orgone flowing out the top because of the single termination.
Matrices in action - Matrices for orgone devices are made in a special way so that they provide many profound matrix layers for orgone to gather in. I will start with the basic "Accumulator styled" matrix, then we can move on to more complex concepts and theories.
Wilhelm Reich built large boxes that a person could sit in. These boxes were designed to accumulate orgone energy and benefit the person within it. The accumulator was unable to filter out DOR, so they were placed in remote areas, away from DOR sources. The boxes typically had a wood frame, holding together several layers of material. As you may know the materials were alternating layers of organic and inorganic sheets. Reich seem to use materials that provided a subset of smaller matrices (or maybe just to provide a maze to the energy). The preferred organic material was fibreglass. Fibreglass is has a plastic/glass matrix, perfect for an accumulator. The preferred inorganic material was steel wool. The inner most material was galvanized sheet metal. I do believe this was to increase the natural capacity of the inner matrix layer. The layers provided an inwards orgone energy movement. The flow was fast enough to penetrate the galvanized steel, but the orgone could not get out. The outer layer is suppose to be organic, for the initial attraction of orgone.
Half of an accumulator (the layers are not to scale, read the "Handbook" for layer details)
Next I will provide theories on how the inward movement and ultimately the accumulation process are achieved.
Accumulation Theory 1 - Dispersion:
This idea is presented in simper terms in the video "Mans Right To Know". Like always, the organic material attracts orgone. So the outer layer will become engulfed in orgone energy. The orgone will enter the next layer in. The next layer is metallic and will disperse orgone towards both of the organic layers around it. Any orgone that escapes the outer layer will most likely be re-attracted inwards (the outer layer must be organic to re-attract dispersed orgone). The same thing applies to the inner alternating layers. But when in the middle of the layers; orgone that is dispersed in the opposite direction is absorbed, then moves inwards again with a larger potential. This inwards movement eventually pushes an excess of orgone into the galvanized steel enclosure.
Accumulation Theory 2 - The Profound Matrix:
If this theory is true, then an accumulator is more effective when the layers are better connected at the edges. The point of the layers is to provide many profound matrix layers that are centered with the object.
Theses layers will provide a natural inwards movement of orgone. A great deal of orgone will move inwards to complete all of the matrix layers.
But to gain an abnormal amount of orgone in the air space in the middle, a part of the first theory must apply. The center galvanized steel, has no associative organic layer and is not there to provide a profound layer. It is there to disperse a bit of orgone to the middle. The next layer outside of it is inorganic, so most of the orgone will disperse inwards with the larger potential.
What's so special about the crystal?- There are very few explanations out there on how the crystal actually purifies DOR. This is a touchy subject as many believe the crystals are sacred and have no direct physical effect on orgone. I would like to say the crystal is Karl's idea and that it is scientific. But it is unclear whether Don Croft or Karl Hans Welz integrated the crystal.
That being said, we must look at the facts. We know non-organic physical materials can influence the behaviour of orgone. We know that all crystals have a crystalline structure. This structure means that the inner's of the material are aligned and symmetrical in an unprecedented manner. We know that orgone needs to be gathered around the crystal first for it to work. We also know that orgone can freely pass through physical objects. Orgone particles can avoid each other when passing through normal matter because of the random influences of said matter, giving the orgone many different paths to travel along with little resistance. I am no expert in molecules but above is a depiction of something to do with matter that may help.
Orgone can travel faster and more straight, through crystals. The crystals atomic arrangement will have an even influence on orgone. Allowing DOR to collide. When the DOR particles collide. The DOR either cancels each other out, or combines to create a new lively POR particle. I think the latter is the more appropriate theory.
This theory assumes that when POR is killed, it splits into these dead orgone particles. These particles then need to be re-united somehow. Unnaturally synthesized energy can kill POR. For instance, ionizing radiation can kill POR by ionizing inside POR particles. It may be questionable whether or not orgone can be effected by physical matter in this sense. But Reich made it quite clear that orgone is a physical energy that can influence and be influence by matter. Making it somewhat appropriate for me to depict orgone as a sum of particles.
Before I stray too far from the subject, the orgone is gathered around and within the crystal so that when orgone particles collide; they do not have any room to bounce. Leading to the end result, being a positive orgone particle.
Things you may not want to hear - Karl Hans Welz does doe's like to mention he has many copycats and he likes to make fun of some of them. I don't blame him, many people make devices that stem from orgonite, with little knowledge of how it works. Ex. half of the copycats add gems and other things to the matrix with no rhyme or reason. Gems are defective crystals and have no special "feel". And if they did, they will not be effective in orgonite, as orgonite is designed with no subjective beliefs in mind. Always use clear crystals, clear or just white crystals will have the least defects and will perform better. Adding random objects to the matrix of a device will not increase its performance. Using different sized inorganic materials for a device will mess up the matrix. In my opinion, BB's and other larger metallic objects do not provide an effective matrix. You want DOR to enter the crystal evenly from all side at the same speed. Adding multiple crystals into a device that has a large central crystal is not beneficial; orgone will travel faster through the crystal than the matrix. They will also have an unpredictable output direction. It might output to the tip end which is the usual case or it will output inwards with the larger potential which is pointless because the orgone already has been purified.
Many people refer to their orgonite derived devices as orgone generators. Orgonite and orgone generators are two different things. If someone has claimed to combine the two into one device, they are frauds. If a device truly generates orgone, the orgone will not be dead and not need to be purified. In simple terms, any device that is called a "orgone generator" but uses the orgonite compound, is a poorly articulated orgonite based device. If a device truly generates orgone, it most definitely does not need a surrounding orgonite compound. This will just be in the way.