Cubase vst-Modules by - HTML preview

Error and Alert Messages

Below follows some of the Alert messages in the program, for which you might need some additional information:

• THIS PATCH CAN'T BE SELECTED VIA MIDI.
• THIS PATCH CAN NOT BE EDITED WHEN ASSIGNED TO A CHILD INSTRUMENT.
• SORRY, IT ISN'T POSSIBLE TO SELECT CHILD PATCHES FOR THIS DEVICE.

These are all due to limitations in the MIDI implementation of a device.

 

• THE STUDIO.DAT DIRECTORY COULD NOT BE FOUND. PLEASE REFER TO THE MANUAL!

The STUDIO.DAT directory contains all your device drivers and Setup settings. Without it nothing works. You will either have to locate it and put it back to its original position or you will have to redo the entire Setup.

• NOTHING HAS BEEN SAVED!
• NOTHING HAS BEEN LOADED.
• SOME SELECTED DATA TYPES HAVE NO DATA LOADED IN MEMORY. PLEASE USE OPEN OR RECEIVE.
• See the heading "SOME DATA TYPE DOESN'T SEEM TO GET INCLUDED" in the Troubleshooting section, above.
• THE DATA DUMP ON DISK HAS A DIFFERENT SIZE. THE OPERATION HAS BEEN CANCELLED.

With some devices the Data Dumps vary in size. The Studio Module is unable to Update a file if the new Data Dump isn’t of the same size as the one in the file. Try Saving instead.

• DATA ERROR! MEMORY OVERFLOW.
• DATA ERROR! HEADER NOT FOUND.
• DATA ERROR! WRONG BLOCK NUMBER.
• DATA ERROR! WRONG DATA SIZE.

The MIDI data that you received or loaded was somehow damaged or incomplete. Please try again.

• MIDI COMMUNICATION ERROR. PLEASE TRY AGAIN.
• MIDI CHECKSUM ERROR. PLEASE TRY AGAIN.
• MIDI DATA IS INCOMPLETE. PLEASE TRY AGAIN.
• MIDI DEVICE IS NOT RESPONDING. PLEASE CHECK CONNECTIONS AND SETTINGS.

These messages might appear during a MIDI transfer. See Troubleshooting above.

 

• THIS PATCH CAN'T BE EDITED (IT ISN'T A 'RAM' PATCH)

 

• THIS PATCH CAN NOT BE EDITED. IT RESIDES IN 'ROM' MEMORY IN THE DEVICE. If the Patch can’t be modified in the device, you can’t edit it in the Studio Module either. Maybe you can copy it to a RAM location first?